27534
Buttle – United States of America (USA)
English
Master
Buttle – United States of America (USA)
English
Master
COVERED DISCIPLINES / SKILLS IN THIS PROGRAM
Business Geomechanics and Technical Mine Area
3.1 Modelling, analysis and design3.1.1 Reviews engineering geology and geotechnical data (including Identifies hazards and modes of failure
3.1.2 Designs testing programmes for geotechnical studies. Undertake geotechnical testing
3.1.3 Conducts rock mass and soil classifications
3.1.4 Understands rock and soil characteristics and identifies failure indications, fundamentals of rock mechanics
3.1.5 Conducts mine geotechnical mapping
3.1.6 Incorporates geology and geomechanic information when selecting mining methods
3.1.7 Provides input on geotechnical issues that influence drill and blast designs
3.1.8 Designs ground support and stope stability plans (e.g. underground, coal, hard rock)
3.3 Integrated mine design
3.3.1 Recommends methods, equipment and processes
3.3.2 Develops initial design
3.4 Mine rehabilitation and closure
3.4.2 Develops mine rehabilitation and closure plans
3.6 Drilling, blasting and rock cutting explosives
3.6.2 Designs drill and blast patterns (e.g. spacing, burden, charge, fragmentation)
3.6.3 Controls fragmentation size by blasting
3.6.4 Understands and applies knowledge and experience of production drilling operations and equipment
3.6.5 Determines the most suitable drill and blast techniques to achieve desired outcomes
3.6.7 Identifies hazards, assesses risk and implements suitable controls
Mining Equipment and Systems Area
5.1 General Mining equipment and systems5.1.1 Uses key factors to select suitable mining machines (e.g. operational characteristics, costs, productivity, and performance)
5.2 Electrical systems
5.3 Loading systems
5.3.1 Understands the characteristics of loading equipment and operations
5.3.2 Designs dragline excavations and spoil piles
5.4 Haulage systems
5.4.1 Designs roads and haul roads with correct cambers, drainage, traffic consideration etc.
5.4.3 Designs, exports and analyses haulage models
5.4.4 Designs and develops schedule plans for continuous haulage systems (e.g. conveyor systems)
5.5 Mining software
5.5.1 Demonstrates proficiency in using at least one mining software package (e.g. VULCAN, DESWIK, XPAC)
5.5.3 Demonstrates proficiency in using 2D CAD software
Mineral Production and Processing Area
7.2 Grade control7.2.1 Applies the quality blending and sampling logic of a site. Understands the implications of marginal stockpiles
7.3 Comminution and sizing
7.3.1 Recognises the characteristics of different comminution and sizing equipment and their limitations
Social Performance Area
9.4 Grievance management,Prevention & management of conflict9.6 Community engagement
Geology Exploration Resources and Reserves Area
2.4 Mineral deposit modelling2.4.1 Creates block models and estimates resources. Interrogates resource models to generate inputs for mine planning
2.4.2 Estimates yield/cut-off grade for resources
2.4.3 Demonstrates a knowledge of the JORC Code and other standards for resource classification requirements for reporting resources
2.4.4 Estimates reserves from a mining model (and interpretation)
2.4.5 Demonstrates an understanding of grade reconciliation, ore dilution and ore loss
2.5 Mine feasibility studies
2.5.1 Prepares the required inputs for an ecomic evaluation of a mine (e.g. personnel, equipment etc.)
Mining Methods Area
4.1 General mining methods4.1.1 General knowledge of mining methods and operations
4.1.2 Comprehends 3D mine plans
4.1.3 Understands the importance of cycle time and its impact on mine productivity
4.1.4 Understands how the planning, geology and mine operations teams work together
4.2 Surface mining methods
4.2.1 Understands the design methods and standards used in pit, ramp and dump design
4.2.2 Calculates basic pit/dump designs and overall pit wall angles for given design parameters
4.2.3 Designs truck and shovel excavations
4.2.5 Optimises open pit design (e.g. Whittle)
4.3 Underground mining methods
4.3.1 Selects a mine stoping and method system for a generic ore body
4.3.3 Designs stope, roof and galleries support
4.3.4 Conducts underground testing of support elements
4.5 Reclamation
Mining Services Area
6.2 Dewatering and Mine drainage and storage systems6.2.2 Calculates water pumping capacity and pumping strategies
6.2.3 Designs storm water management systems for open pit mines
6.4 Ventilation
6.4.1 Understands and applies the key principles to mitigate air pollution and toxic gas concentrations in underground mining
6.4.2 Uses ventilation software to model ventilation systems
6.4.3 Designs efficient ventilation systems for underground mine designs
6.7 Surveying
6.7.1 Undertakes basic mine surveys
6.7.2 Interprets survey data, plans, maps and photos
Generic, Health and Social Task Area
8.1 Environment8.1.1 knowledge and management of environmental impact assessment studies
8.2 Workplace health and safety
8.3 Communication
8.3.1 Communication in native language
8.3.2 Community relations
8.3.4 Using internet in a critical manner as communication tool and source of information
8.3.6 Listens and communicates effectively. Chairs meetings. Prepares documents and reports
8.3.7 Promotes company, industry and profession
8.3.8 Ability to communicate Earth Science issues with the wider society
8.4 Creative thinking, problem solving and research
8.4.1 Identifies, scopes and solves problems
8.4.2 Uses conceptual, critical, strategic and systems thinking skills
8.4.3 Researches new products, techlogies and processes
8.5 Sustainability
8.5.1 Engages with stakeholders. Recognises corporate social responsibility
8.6 Self-management
8.6.1 Accepts responsibility
8.6.2 Develops and maintains networks
8.7 Working with people
8.7.2 Recognises diversity and multiculturalism (knowledge of other cultures and customs
8.7.3 Identify objectives and individual and collective responsibilities and act correctly in such roles
8.7.4 Ethics. Transmit credibility and integrity
8.7.5 Coaching and leading teams